.jpg)
The electric car is cooling circulating pump car drive motor, controller and batteries, and is one of the important components of the cooling system, the function of the pump is through the study of the pressure of cooling fluid, ensure the circulation flow in the cooling system, so as to achieve the purpose of the temperature control system. The Coolant circulating pump adopts advanced non-inductive string wave control algorithm, which is stable and efficient.
Advantage:
• Ambient Temperature -45℃~80℃
• Intelligent control, FG signal, 6 Intelligent Protection Function
• Long working life >20,000 hours
• Good batch consistency, defect rate as low as 1/100000
• Low heat generation, fast heat dissipation, good cooling effect
Features:
·High efficiency ECM brushless DC motor with long lifetime.
·Heavy duty work, can sustain 24 hours continuous running.
·Durable permanent magnetic rotor & high density ceramic shaft.
·Advanced magnetic driving technology, static-seal without leakage forever.
·Replacing position sensor by micro processor position calculation, -40°C~100°C wide operating temperature is realized, suitable for extreme outdoor environment.
·Optimized 3 phase motor high efficiency design, combined with low-resistance copper wire, achieving large flow and low temperature rise.
·Anti-vibration pump rubber bracket designed for automotive vibration working condition.
·Highly adaptable circuit designed specially for unstable automotive voltage and peak voltage.
·Automotive water-proof connector.
·Applied liquid: pure water, antifreeze solution.
·Low or no maintenance.
·Low power consumption
Protection functions:
Over-Voltage Protection,Over-Current Protection,Blocked-Protection,Polarity Protection，constant power output，Dry-running Protection
Protection functions:
·Automatic polarity protection ·over-voltage protection,Blocked-Protection
·over-current protection ·constant power output ·dry-running protection
Application:
Electric Vehicle Charging Pile Cooling Circulation
Liquid Cooled EV Charging,EV Charging Pile
E-car charging cables,eMobility charging cables
Electric Vehicles Inverter Cooling System
Electric Vehicles Battery Cooling System
Automobile Engine Cooling
Car Engine Cooling Circulation
Car Engine Pre-heating
Heating System (Car Auxiliary heaters & parking heaters)
Normal Hot Water Circulation
Liquid Transfer
General Purpose Pumping
Specifications:
| Max Flow Rate | 34L 37L |
| Max Static Lift | 8.5M |
| Rated Voltage | 12V 24V |
| Impeller Type | open impeller |
| Liquid Temperature | -40-100°C |
| Pump Theory | Centrifugal pump |
| Motor Type | 3 phase motor |
| Media | Pure Water，antifreeze |
| Use Place | Indoor |
| Working Voltage Range | 6~18V 12~28V |
| Power Consumption | 60W |
| Ideal Life Time | >20000 Hours |
| Working Mode | Continuous |
| OD of Inlet | 22mm |
| OD of Outlet | 22mm |
| Power Supply | DC power supply, battery |
| Protection Functions | Automatic polarity protection,over-voltage protection,over-current protection, constant power output,dry-running protection,Blocked-Protection |
| Remarks | Not Self-priming |
Parameter:
| Model | Product Code | Max Flow Rate((L/M)) | Rated Voltage(V) | Current(A) | Max Water Head(M) | Power(W) |
| TA60 | TA60-R12-3409 | 34L | 12 | 4.5 | 8.5 | 54 |
| TA60-R24-3709 | 37L | 24 | 2.5 | 8.5 | 60 |
Curve & Dimension: 
.jpg)
Awaiting for your inquiry, we will response you at the first time!
