TOPSFLO TG series direct drive gear pump-motor units are built to handle clean and relatively viscous fluids at a maximum temperature of 70 °C (158 °F) with pressure up to 4 bar (58 psi) and flow rates up to 2.5 l/min (0.66 GPH)
The pump housing and the gears are made of high quality plastic. Seals are available in NBR, EPDM or Viton. Suction/discharge ports are 8 mm barbed end. The pump drives are available in 12V or 24V brush DC options and in a range of different nominal speeds and powers for intermittent duty use. The compact design makes it the preferred choice where space is limited. FDA, NSF certified pumps for potable water or fluids for human consumption are also available.
Why Choose TOPSFLO 24V Gear Milk Pumps for Commercial Coffee Machines?
1. NSF, LFGB, FDA standards reduces the risk of milk residue
Selected NSF, LFGB, FDA certified materials, the compact internal structure minimizes dead zones and crevices, enabling fast and thorough cleaning while significantly reducing residue buildup from perishable media such as milk

2.Imported unique seal design zero leakage under high pressure
The unique imported sealing system ensures stable operation unde hign pressure with 0 leakage risk, Specially designed gears, produced with high-precision molds, feature minimal dearance and no interference,ensuring consistent fow under varying pressure.

3. Duty cycle stepless adjustment, Precise milk temp control
DC gear pump supports 15-100% stepless duty cycle adjustment for accurate temperature control, delivering consistent mlk-based beverages,ldeal for commercal cofiee machines. it meets the demands of quality and efficiency in the high-end market.

4. Low-Interference Drive, EMC-Compliant Motor Design
The motor is engineered to meet international electromagnetic compatibility (EMC) standards, ensuring stable operation without interfering with other electronic devices, while prowiding sufficient margin for certification comp

Direct Drive Gear Pump Application:
Fully Automatic Commercial Coffee Machine
Pump for milk system
Specifications:
Technical data
| Brand | TOPSFLO |
| Model | TG01-A24-B01-0204 |
| Max Pressure | 4 bar |
| Max Flow Rate | 2.5L/Min |
| Continue work Pressure /System Pressure (max) | 0.25MPa/0.4MPa |
| Voltage | 24VDC |
| Operating voltage range | 24V:18~28VDC |
| Max Speed | 4400RPM |
| Work mode | Intermittant |
| Material | Gear:Plastic Oil Seal: FKM /HNBR Center shaft / Gaskets: SUS304 Sealing ring: EPDM / Silicone |
| Motor Type | Brushed DC Motor |
| Seal Type | Lip seal |
| Life | 1000H |
| Certification | NSF, FDA, LFGB, REACH,CE,RoHS |
| Fluid Type | water, milk, beverages |
| Fluid Temperature Range | 0 to 80 °C |
| Storage environment requirements | Temperature:-30℃~70℃, Humidity:60%RH |
| Work environment requirements | Temperature:-25℃~70℃, Humidity:60%RH |
| Noise Level | 62(dBA/1M) |
Parameter:
| Model | Product Code | Rated Voltage | No load Current (A) | Max. Load Current (A) |
Head (Bar) |
Flow (L/min) |
| TG01 | TG01-A12-B01-0204 | 12 | 0.9 | 1.8 | 4 | 2.5 |
| TG01-A24-B01-0204 | 24 | 0.6 | 1.8 | 4 | 2.5 |
Curve & Dimension: 

Awaiting for your inquiry, we will response you at the first time!



